Recycling Plant Set-up
RECYCLING PLANT SET- UP
AGRICULTURAL
WASTE RECYCLING SET-UP
(Satishsa Consulting Solution Private Limited Provide
Complete Solution Plant Machinery & Govt Clearance/ Compliance)
Steps
involved in applying for grant of one-time financial support for establishment
of new paddy straw based pelletisation plant
Launched
by CPCB under Environment Protection Charge (EPC) funds
The Central
Pollution Control Board (CPCB) has introduced a financial support scheme to
encourage the establishment of paddy straw-based palletization plants. This
scheme aims to promote entrepreneurship and address the issue of paddy straw
waste in specific regions, including the NCT of Delhi, Punjab, Haryana, and NCR
districts of Rajasthan and Uttar Pradesh. The key features of the scheme are as
follows:
Documentation required- application form
along with following documents
Ø
Registration
certificate of company.
Ø Proof of land ownership/ lease agreement where the proposed unit is to be setup.
Ø Undertaking by the applicant that their unit is not receiving any form of financial assistance for pelletisation plant from any other Central Government scheme.
Ø Consent To Establish (CTE) from PPCB and other statutory approvals.
Ø Preference to units having
Ø Agreement with local farmers for supply of paddy straw.
Ø Committed sale of paddy straw pellets produced by the unit.
Procedure for applying
Why Are you waiting Call Now SSatishsa Consulting Solution Private Limited Get your Grant?
Ø
Application with all
the supporting documents to be submitted online to Central Pollution Control
Board through Application form.
Ø
Application received
will be forwarded to PPCB.
Ø
Appraisal of the
application by PPCB and forward it to CPCB along with its recommendations.
Ø
Evaluation of
application by a committee constituted by CPCB.
Ø
Approval for release
of funds based on the recommendation of the committee.
Ø
Release the funds to
PPCB by CPCB.
Ø
Machinery required
for Paddy straw pelletisation Release of financial support amount directly into
the earmarked account. However, funds will only be released once the PPCB has
granted CTE to the applicant.
Ø
Submission of bank
guarantee equivalent to the amount of the financial support released in the
name of PPCB by the applicant before the release of financial support, with a
validity of minimum 01 year. The bank guarantee to be released back to the
applicant after start of commercial production i.e. submission of first invoice
for sale of product.
Ø
PPCB to monitor:
Ø
The progress of the
project and ensure its timely completion.
Ø
Paddy straw
utilization in the pelletisation plant and ensure that only paddy straw is used
for producing pellets.
REGISTERED VEHICLE SCRAP FACILITY SET-UP
(Satishsa Consulting Solution Private Limited Provide
Complete Solution Plant Machinery & Govt Clearance/ Compliance)
The Central government, under the authority granted by Section 59 of the Motor Vehicle Act (59 of 1988), has issued guidelines for the establishment, authorization, and operation of Authorized Vehicle Scrapping Facilities (AVSF) in the country. These guidelines are applicable to vehicles that are no longer validly registered under Section 41 of the Motor Vehicle Act 1988 or for owners who wish to scrap their vehicles. The purpose of these guidelines is to ensure the safe and regulated disposal of such vehicles, protecting the environment and promoting a legally compliant vehicle dismantling and scrapping industry.
Title: Guidelines for
Registered Vehicle Scrapping Facility (RVSF/AVSF)
Definitions:
Authorized Scrapper: A person, firm, society, trust, or
company that owns and operates an Registered Vehicle Scrapping Facility (ASVF/RVSF).
Registered Vehicle
Scrapping Facility (RSVF/AVSF): An establishment holding an Authorization for Vehicle Scrapping, issued
under these guidelines, for conducting dismantling and scrapping operations.
Certificate of Deposit: A certificate issued by the ASVF to
acknowledge the transfer of vehicle ownership from the registered owner to the
Authorized Scrapper for further treatment.
Certificate of Vehicle
Scrapping: A
certificate issued by an AVSF to confirm the final disposal of a vehicle, to be
retained by the Authorized Scrapper.
End of Life-Vehicles
(ELV): Vehicles that
are no longer validly registered, cancelled under Chapter IV of the Motor
Vehicles Act 1988, ordered by a court of law, or declared as waste vehicles by
the legitimate registered owner due to circumstances such as fire, damage,
natural disasters, riots, or accidents.
Final Disposal: The completion of vehicle treatment
where it is no longer usable, and the engine is disposed of in accordance with
CPCB Guidelines.
Licensing Authority: The Commissioner (Transport) or any
other designated officer appointed by the Government of the State/UT.
Scrapping Yard: A designated area within the AVSF
premises where dismantled vehicle parts are processed using shredders or other
machinery into scrap parts for sale to recycling companies.
Warehouse: A designated location within the AVSF
where processed scrap and usable parts are refurbished, catalogued, stored, and
sold for re-use.
Requirements:
The AVSF must have connectivity and access to the VAHAN
vehicle registration database with secure user credentials and IT systems
certified for safe access.
The AVSF is responsible for verifying the identity of the
person handing over the vehicle for scrapping to establish the legitimacy of
the owner. A copy of this verification must be kept on record for a minimum of
six months.
These guidelines aim to ensure the smooth operation of
Authorized Vehicle Scrapping Facilities, promoting environmentally sound
vehicle disposal practices while maintaining proper documentation and security
measures. By adhering to these guidelines, the authorized scrappers and
facilities contribute to sustainable waste management and comply with relevant
regulations.
Conditions of Eligibility:
The
eligibility conditions for grant of authorization for treatment of end of life
vehicles in an AVSF by respective State/UT government are:
1.
The
AVSF must be owned and operated by any legal entity be it a person, firm,
society or trust established with applicable laws.
2.
The entity must possess:
i.
Certificate
of Incorporation
ii.
Valid
GST registration
iii.
Valid
PAN
3.
The entity:
i.
Should
have or applied for CTE from the authority of State/UT in which AVSF is
located.
ii.
Should
meet the minimum technical requirements for collection and dismantling centers
as per CPCB, should have manpower and equipment to carry out dismantling
activities.
iii.
Shall
undertake to obtain required quality certifications of ISO 9001/ISO 14001/ISO
45001 within 12 months of commencement of operations
iv.
Should
possess a No Objection Certificate (NOC) of SPCB within 6 months of
commencement.
v.
Should
provide approved Plant Layout and building Plan and also have environment
management plan for the facility.
Validity
and Renewal of Authorization:
The Authorization is valid for
period of 10 years, which shall be renewed for another 10 years. The
Authorization shall not be transferable.
Criteria
for Scrapping of Vehicle:
i.
Vehicles
which have not renewed their Original Certificate of Registration with Rule 52
of the CMVR (Central Motor Vehicle Rule).
ii.
Vehicles
which have not granted a certificate of fitness.
iii.
Vehicles
which have damaged due to fire, riot, natural disaster, accident or any
calamity, where the registered owner self certifies same as scrap.
iv.
Vehicles
declared as obsolete/surplus/beyond economic repair by Central/state government
is offered for scrapping.
v.
Vehicles
bout by any agency including AVSF in an auction for scrapping of vehicles.
vi.
Vehicles
which have outlived their utility or for projects in mining, highway, power,
farms, etc. may be self-certified by the owner.
vii.
Manufacturing
rejects and test vehicles may be certified by Vehicle OEM
viii.
Auctioned,
impounded and abandoned vehicles by any Enforcement Agency.
Certificate of Vehicle Scrapping:
i. Upon completion of the necessary treatment, the Authorized Scrapper
will issue a Digital 'Certificate of Vehicle Scrapping' along with a digital
photograph.
ii. The Central Government will maintain a separate record of scrapped
vehicles on the VAHAN database.
iii. The reuse or resale of any refurbished parts, including engines,
obtained from the scrapped vehicle, shall comply with the policy, guidelines,
and standards issued periodically.
The dismantling and scrapping of waste vehicles must adhere to the
'Guidelines for Environmentally Sound Management of End of Life Vehicles'
(ELVs) published by CPCB and take place only in authorized scrapping yards.
Applicable
Rules /Acts:
a. The
Motor Vehicle Act,1988: This Act was amended in 2019 which provides in detail
the legislative provision for the license which are used for driver/conductors,
for registration of motor vehicles, control of motor vehicle through permits,
traffic regulations, insurance, liability, offences and penalties, etc. To
exercise the legislative provision of Act, the Central Motor Vehicle Rule was
made by Government of India. This policy is against the liability which is
incurred in respect of death, or injury to person, or damage to any property of
third party.
The Act mandates that no
person/owner shall drive motor vehicles unless the vehicle is registered.
The certificate of registration
shall be valid for 15 years and shall need renewal. The suspension of
registration motor vehicle shall be made by registered authority if they find
that use of motor vehicle may be dangerous to public.
The Central Motor Vehicle Rules, 1989: —A trade certificate which is granted or renewed shall be for a period of twelve months from the date of issue or renewal thereof and shall be effective throughout India. The provisions shall not apply to a person while receiving instructions or gaining experience in driving for a test of competence to drive, so long as the person is the holder of an effective learner's license issued to him and such person is accompanied by an instructor holding an effective driving license to drive the vehicle and there is painted, in the front and the rear of the vehicle or on a plate or card affixed to the front and the rear, the letter "L" in red on a white background. Every driving license issued or renewed by a licensing authority.
One year from the date of
commencement of Central Motor Vehicles (Amendment) Rules, 1993, any person
driving a goods carriage carrying, in addition to being the holder of a driving
license to drive a transport vehicle, also have the ability to read and write
at least one Indian language.
Various State and UT Motor Vehicles Rules,1993
d.
Indian
Penal Code,1860
e.
The
Hazardous Waste (Management, Handling and Trans boundary movement) Rules, 2008
as amended fro
f.
The
Ozone Depleting Substances (Regulation and control) Rules,2000
g.
The
Batteries (Management and Handling) Rules,2011 as amended 2016
h.
The
Plastic Waste (Management and Handling) Rules 2016.
E-WASTE
RCYCLING PLANT SET-UP
(Satishsa Consulting Solution Private Limited Provide Complete Solution Plant Machinery & Govt Clearance/
Compliance)
Setting up an E-Waste Recycling Plant in accordance with
the E-Waste Management Rules 2022 is a crucial step towards effective
management of electronic waste and promoting sustainable practices. These
rules, formulated by the Central Government, aim to regulate the generation,
collection, storage, transportation, processing, and disposal of e-waste.
The establishment of an E-Waste Recycling Plant requires
adherence to the following guidelines:
Obtaining Authorization: The plant operator must obtain
necessary authorizations and permits from the State Pollution Control Board (SPCB) or Pollution Control Committee
(PCC) as mandated by the E-Waste Management Rules. This includes obtaining a
valid Consent to Establish (CTE) ,
Consent to Operate (CTO) AND
E-WASTE AUTHORIZATION from the
regulatory authorities.
Infrastructure and
Facilities: The
recycling plant should have appropriate infrastructure and facilities to ensure
safe and environmentally friendly recycling processes. This includes dedicated
areas for storage, segregation, dismantling, and processing of e-waste.
Adequate measures should be taken to prevent pollution, handle hazardous
substances, and manage emissions, effluents, and waste generated during the
recycling operations.
Collection Mechanism: The plant should have a well-defined
collection mechanism to ensure the proper collection and segregation of
e-waste. Collaborating with authorized collectors, producers, or any registered
organization involved in e-waste management can facilitate the collection
process.
Technological
Capabilities: The
plant should be equipped with suitable technologies and machinery to handle
various types of e-waste. This includes shredders, separators, smelters, and
other specialized equipment required for safe and efficient recycling
processes. The technology used should comply with the guidelines prescribed by
the Central Pollution Control Board
(CPCB) for environmentally sound recycling practices.
Compliance with
Occupational Health and Safety Standards: The plant must ensure the safety and well-being of its
workers. Compliance with occupational health and safety standards, including
the provision of personal protective equipment (PPE), training on handling
hazardous substances, and maintaining a safe working environment, is essential.
Record-keeping and
Reporting: The plant
should maintain proper records of the quantity and type of e-waste received,
processed, and dispatched. Regular reporting to the SPCB or PCC regarding
e-waste management activities, including the quantity of e-waste handled and
the mode of disposal, is mandatory.
Environmental Management
Plan: The plant
should develop and implement an Environmental Management Plan (EMP) to address
potential environmental impacts. The EMP should outline measures to minimize pollution,
monitor air and water quality, manage solid and hazardous waste, and ensure
compliance with relevant environmental regulations.
Potential of E-waste Recycling and
Refurbishing in India:
Because India is lacking in valuable mineral resources
and untreated e-waste ends up in landfills there is a need for a well-designed,
controlled e-waste recovery framework that creates employment as well as
income.
Computer displays, motherboards, mobile phones and
chargers, compact discs, headphones, televisions sets, air conditions, and
refrigerator are examples of electronic garbage (e-waste). According to the
India E-waste Monitor 2017, India creates around 10.74 lacs MT of e-waste and
annually 31% increasing every year, ranking fifth among e-waste generating
countries behind the united states, China, Japan and German.
There are already 500 registered e-waste recyclers in
India, who have been approved state governments to handle e-waste. However,
many of India’s e-waste recyclers do not recycle garbage at all. According to a
Union Environment Ministry assessment, some are keeping it in hazardous
circumstances, while others cannot even handle such garbage.
Initiatives to raise awareness about
e-waste management
Since 2015, the Ministry of Electronics and Information
Technology (Meity) has collaborated with industry associations to launch an
e-waste awareness program under Digital India to educate the public about the
dangers of unorganized e-waste recycling and to raise awareness about
alternative recycling methods.
Criteria for Establishing the E-waste
Recycling Unit:
According to the E-discarded (Management) Rules 2016, a
recycler is someone who recyclers, reprocess, or recovers waste electrical and
electronic equipment, assemblies or components.
1.
An
E-waste recycling facility should install adequate wastewater treatment
equipment for wastewater treatment and air pollution control equipment,
depending on the kind of activities taking place in the recycling plant.
2.
A
suitable location for dismantling equipment must be provide where manual
dismantling can take place.
3.
A
recycling facility with a daily capacity of 5 tons per day must have minimum
size 500 square meter.
4.
If
recycling facility has a capacity of 20 MT per and an area about 2000 square
meter, it will be given precedence.
Procedure for applying E-waste Recycling or Need of documentation
Why Are you waiting Call Now Satishsa Consulting Solution Private Limited Get your Grant?
1. Lease
of deed/Rent permission of land
2. Minimum
land requirement 500 sq mtr in Red Industrial zone.
3. Allotment
Letter
4. Ownership
document of industrial land
5. CLU
of land in private zone
6. Layout
of factory
7. Site
Plan of Factory
8. ETP
Plant
9. APCD
Device
Company of documentation:
1.
CIN /LLP certificate
2.
Gst Certificate
3.
Company Pan Card
4.
Authorized Person Pan card & Aadhar Card
5.
Passport size Photo
6.
Signature of Authorized
7.
Board of Resolution
Approval requirement to Run Recycling Unit
ü DIC Registration (District
Industries Centre)
ü Consent to Establish (CTE)
ü Consent to Operate (CTO)
ü Authorization Under HWM rules 2016
ü Passbook
Copy
ü Authorization under E-waste Management Rules
2016
(As Recycler)
ü ISO- 9001,14001, and 45001
By adhering to these guidelines, an E-Waste Recycling
Plant can contribute significantly to the proper management and disposal of
electronic waste while minimizing the environmental and health risks associated
with improper handling. It is essential to promote sustainable practices,
resource recovery, and responsible recycling to build a greener and cleaner
future
PLASTIC-WASTE RCYCLING PLANT SET-UP
(Satishsa Consulting Solution Private Limited Provide Complete Solution Plant Machinery & Govt Clearance/
Compliance)
Are you looking to establish a plastic waste recycling
unit in compliance with the Plastic Waste Management Rules-2022? Satishsa Consulting Solution Private Limited is here to assist you every step of the way. With our
expertise and comprehensive understanding of the regulations, we provide
tailored solutions to help you successfully set up and operate a plastic waste
recycling facility.
Regulatory Compliance
Guidance: We will
guide you through the requirements outlined in the Plastic Waste Management
Rules-2022, ensuring that your recycling unit meets all the necessary legal and
environmental obligations. From obtaining the required permits and
authorizations to complying with waste disposal guidelines, we'll ensure that
your operations align with the regulations.
Facility Planning and
Design: Our team of
experts will assess your specific requirements and assist in designing an
efficient and sustainable plastic waste recycling facility. We will provide
recommendations on the layout, equipment selection, and waste handling
processes to optimize your operations for maximum productivity and
environmental performance.
Technology Selection: Choosing the right recycling technology is crucial for the success of your unit. We will help you evaluate and select appropriate recycling technologies that align with the type and volume of plastic waste you intend to process. Our expertise extends to mechanical recycling, pyrolysis, and other advanced technologies, enabling you to make informed decisions regarding the most suitable approach for your recycling unit.
Process Optimization: We analyze your recycling processes
to identify opportunities for improvement, such as enhancing sorting
efficiency, optimizing material recovery, and reducing energy consumption. Our
aim is to maximize resource utilization and minimize waste generation,
contributing to a more sustainable and economically viable operation.
Quality Assurance and
Control: Ensuring the
production of high-quality recycled plastic is essential for market acceptance.
We will assist you in implementing robust quality assurance and control
measures, including the development of quality standards, testing protocols,
and documentation procedures. This will help you meet customer expectations and
comply with regulatory requirements.
Training and Capacity
Building: Satishsa Consulting Solution Private Limited offers training programs to enhance the skills and knowledge
of your workforce. Our training modules cover various aspects of plastic waste
recycling, including safety protocols, operational best practices, and
environmental compliance. We empower your team to effectively manage the
recycling processes and handle any challenges that may arise.
Plastic Recycling Procedure
Colleting, Sorting, Shredding, Washing, Dewatering,
Drying, Molding and Compression molding are the most basic steps in plastic
recycling
Types of Plastic Waste
Under the Plastic Waste Management Rules-2022, four types
of plastic waste are categorized based on their characteristics and potential
for recycling and disposal.
These categories
are:
Category-I: HDPE (High Density Polyethylene), PET (Polyethylene
Terephthalate), LLDPE (Linear Low Density Polyethylene), LDPE (Low Density
Polyethylene), PVC
Category-II: LDPE (Low density Polyethylene), PP
(Poly-propylene)
Category-III: MLP, Multilayer Packaging
Category-IV: Decomposable Plastic
Criteria for Establishing the E-waste
Recycling Unit:
1.
The
first and most important thing you’ll need to open your recycling plant is a
suitable location. It should have enough space to store all waste and waste
products, as well as equipment and utilities.
2.
The
second requirement is a closed space similar to a factory, but a small room can
also work, It should be at least 200 square meter.
3.
The
machine with which you will recycle your plastic waste is the next requirement.
4.
Then
there’s the plastic waste, which needs to be recycled. You can accomplish this
by establishing a network of plastic waste suppliers who can supply the
required amount of plastic waste.
Procedure for applying E-waste Recycling or Need of documentation
Why Are you waiting Call Now Satishsa Consulting Solution Private Limited Get your Grant?
1. Lease
of deed/Rent permission of land
2. Minimum
land requirement 500 sq mtr in Red Industrial zone.
3. Allotment
Letter
4. Ownership
document of industrial land
5. CLU
of land in private zone
6. Layout
of factory
7. Site
Plan of Factory
8. ETP
Plant
9. APCD
Device
Company of documentation:
1. CIN /LLP
certificate
2. Gst
Certificate
3. Company Pan
Card
4. Authorized
Person Pan card & Aadhar Card
5. Passport
size Photo
6. Signature
of Authorized
7. Board of
Resolution
Approval requirement to Run Recycling Unit
ü DIC Registration (District
Industries Centre)
ü Consent to Establish (CTE)
ü Consent to Operate (CTO)
ü Authorization Under PWM rules
2016
ü PWP
Authorization from CPCB
(As Recycler)
ü ISO- 9001,14001, and 45001
By adhering to these guidelines, an E-Waste Recycling
Plant can contribute significantly to the proper management and disposal of
electronic waste while minimizing the environmental and health risks associated
with improper handling. It is essential to promote sustainable practices,
resource recovery, and responsible recycling to build a greener and cleaner
future
By choosing Satishsa Consulting Solution Private Limited as your partner,
you gain access to our in-depth industry knowledge, technical expertise, and
commitment to sustainability. Together, we can establish a plastic waste
recycling unit that not only complies with the Plastic Waste Management
Rules-2022 but also contributes to the circular economy by reducing plastic
pollution and promoting resource conservation.
Contact us today to learn more about our services and how
we can assist you in setting up a successful and environmentally responsible
plastic waste recycling unit. Let's work together to make a positive impact on
the environment and create a sustainable future.
Li-ion
Battery-WASTE RCYCLING PLANT SET-UP
(Satishsa Consulting Solution Private Limited Provide Complete Solution Plant Machinery, Technology & Govt
Clearance/ Compliance)
At Satishsa Consulting Solution Private Limited, we offer comprehensive guidance and support for setting up
a Li-ion Battery Recycling Plant in compliance with the Battery Waste
Management Rules-2022. With our expertise in waste management regulations and
industry best practices, we can assist you in establishing a state-of-the-art
facility that ensures the safe and environmentally sound recycling of Li-ion
batteries.
The Battery Waste
Management Rules-2022 aim to promote the sustainable management of battery
waste and minimize its adverse impacts on the environment and human health.
When it comes to Li-ion batteries, which are commonly used in various
electronic devices and electric vehicles, proper recycling is crucial due to
their potential for hazardous substances and valuable resources.
Our
services include:
Regulatory
Compliance: We
will help you understand and comply with the specific requirements outlined in
the Battery Waste Management Rules-2022. This includes obtaining the necessary
permits, licenses, and approvals from regulatory authorities.
ü DIC
Registration (District Industries Centre)
ü Consent to Establish (CTE)
ü Consent to Operate (CTO)
ü Authorization Under PWM rules
2016
ü PWP
Authorization from CPCB
(As Recycler)
ü ISO- 9001,14001, and 45001
Facility
Design and Layout:
Our team of experts will work closely with you to design an efficient and safe
Li-ion Battery Recycling Plant. We will ensure that the facility meets all
necessary standards and guidelines for waste management, occupational health,
and safety.
Process Development: We will assist you in developing a comprehensive recycling process that maximizes the recovery of valuable materials from Li-ion batteries while minimizing environmental impact. This may include sorting, dismantling, shredding, and separation techniques to extract metals, plastics, and other components.
Safety
and Environmental Considerations:
We prioritize the safety of your personnel and the surrounding environment. Our
consultants will help you implement appropriate safety protocols, waste storage
and handling procedures, and pollution control measures to mitigate risks and
ensure compliance with environmental regulations.
Quality
Management Systems:
We can support you in establishing robust quality management systems to track
and monitor the recycling process, ensuring consistent output quality and
adherence to international standards.
Training
and Capacity Building:
Our team will provide training programs for your staff on best practices in
Li-ion battery recycling, safety protocols, and quality control procedures.
This will enhance their knowledge and skills to effectively manage the
recycling operations.
Criteria for Establishing the E-waste
Recycling Unit:
5.
The
first and most important thing you’ll need to open your recycling plant is a
suitable location. It should have enough space to store all waste and waste
products, as well as equipment and utilities.
6.
The
second requirement is a closed space similar to a factory, but a small room can
also work, It should be at least 2000 square meter.
7.
The
machine with which you will recycle your Li-ion waste is the next requirement.
8.
Then
there’s the Li-ion waste, which needs to be recycled. You can accomplish this
by establishing a network of Li-ion waste suppliers who can supply the required
amount of Li-ion waste.
Procedure for applying E-waste Recycling or Need of documentation
Why Are you waiting Call Now Satishsa Consulting Solution Private Limited Get your Grant?
10. Lease
of deed/Rent permission of land
11. Minimum
land requirement 500 sq mtr in Red Industrial zone.
12. Allotment
Letter
13. Ownership
document of industrial land
14. CLU
of land in private zone
15. Layout
of factory
16. Site
Plan of Factory
17. ETP
Plant
18. APCD
Device
Company of documentation:
8. CIN
/LLP certificate
9. Gst
Certificate
10. Company
Pan Card
11. Authorized
Person Pan card & Aadhar Card
12. Passport
size Photo
13. Signature
of Authorized
14. Board
of Resolution
By partnering with Satishsa Consulting Solution Private Limited, you can benefit from our extensive experience in waste management consulting and our commitment to sustainable practices. Together, we can establish a Li-ion Battery Recycling Plant that contributes to resource conservation, reduces environmental pollution, and meets the requirements of the Battery Waste Management Rules-2022.
TYRE-WASTE
RCYCLING PLANT SET-UP
(Satishsa Consulting Solution Private Limited Provide Complete Solution Plant Machinery, Technology & Govt
Clearance/ Compliance)
Welcome to Satishsa Consulting Solution Private Limited, your trusted
partner for setting up a tire waste recycling plant. With our expertise and
experience in the field of waste management, we provide comprehensive
consulting services to guide you through every step of the process.
Setting up a tire waste recycling plant is a
strategic move towards sustainable waste management and resource conservation.
At Satishsa Consulting Solution Private Limited, we offer tailored solutions to help you establish a
successful and efficient recycling facility.
Our consulting services for tire waste recycling plant set-up include:
Feasibility Studies: We conduct detailed
feasibility studies to assess the viability and potential risks associated with
the tire waste recycling project. This analysis helps you make informed
decisions and ensures the project's success.
Technology Selection: Choosing the right
recycling technologies is crucial for effective tire waste processing. Our team
provides guidance on selecting appropriate machinery and equipment, including
shredders, granulators, classifiers, and separation systems.
Process Design and Optimization: We assist in
designing the recycling processes to maximize efficiency and output. This
includes optimizing the collection and sorting of tire waste, as well as the
shredding, granulation, and separation processes.
Facility Layout and Design: We help optimize
the layout and design of your recycling facility to ensure smooth workflow,
safe operations, and compliance with environmental regulations. Efficient space
utilization and proper zoning of different processing areas are key
considerations.
Environmental Compliance: Recycling tire
waste requires adherence to environmental regulations and standards. We assist
in obtaining the necessary permits, ensuring proper waste management practices,
and implementing pollution control measures.
Supply Chain Management: We help establish an
effective supply chain for tire waste collection, transportation, and storage.
This includes developing partnerships with waste collection agencies, tire
retailers, and other stakeholders in the industry.
Financial Analysis: We conduct a thorough
financial analysis, including cost estimation, revenue projections, return on
investment (ROI), and payback period calculations. This analysis helps
determine the financial viability of the tire waste recycling plant.
Training and Support: We provide
comprehensive training programs for your workforce, ensuring they have the
necessary skills and knowledge to operate the recycling plant efficiently and
safely. We also offer ongoing support to address any operational challenges
that may arise.
Criteria for Establishing the Tire-waste
Recycling Unit:
9. The
first and most important thing you’ll need to open your recycling plant is a
suitable location. It should have enough space to store all waste and waste
products, as well as equipment and utilities.
10.
The
second requirement is a closed space similar to a factory, but a small room can
also work, It should be at least 2000 square meter.
11.
The
machine with which you will recycle your Tire- waste is the next requirement.
12.
Land
Should be existing in Red Industrial Zone
13.
Then
there’s the Tire- waste, which needs to be recycled. You can accomplish this by
establishing a network of Tire- waste suppliers who can supply the required
amount of Tire- waste.
Procedure for applying Tire-waste Recycling or Need of documentation
Why Are you waiting Call Now Satishsa Consulting Solution Private Limited Get your Grant?
19. Lease
of deed/Rent permission of land
20. Minimum
land requirement 500 sq mtr in Red Industrial zone.
21. Allotment
Letter
22. Ownership
document of industrial land
23. CLU
of land in private zone
24. Layout
of factory
25. Site
Plan of Factory
26. ETP
Plant
27. APCD
Device
Company of documentation:
15. CIN
/LLP certificate
16. Gst
Certificate
17. Company
Pan Card
18. Authorized
Person Pan card & Aadhar Card
19. Passport
size Photo
20. Signature
of Authorized
21. Board
of Resolution
At Satishsa Consulting Solution Private Limited, we are committed to
delivering successful tire waste recycling plant set-up solutions that
contribute to a greener future and circular economy. Our expertise and industry
insights enable us to guide you towards an environmentally sustainable and
economically viable recycling venture.
Partner with us to establish your tire waste
recycling plant. Contact Satishsa Consulting Solution Private Limited today, and let us help you turn
your vision into a reality. Together, we can make a positive impact on the
environment while unlocking the value of tire waste.
C&D-WASTE
RCYCLING PLANT SET-UP
(Satishsa Consulting Solution Private Limited Provide Complete Solution Plant Machinery, Technology & Govt.
Clearance/ Compliance)
Satishsa Consulting Solution Private Limited, your trusted
partner in Construction and Demolition (C&D) waste recycling, in full
compliance with the C&D Rules 2016 set forth by the Ministry of
Environment, Forest, and Climate Change in India.
At Satishsa Consulting Solution Private Limited, we understand the significance of responsible waste management in the construction industry. Our expert team is dedicated to providing comprehensive solutions for C&D waste recycling, ensuring a cleaner and greener environment while promoting sustainable development.
Our Services:
Segregation and Collection: We emphasize the
importance of waste segregation at the source to maximize recycling potential.
Our team efficiently collects C&D waste from construction sites, ensuring
it reaches the right processing facilities.
Recycling
Facilities: Satishsa Consulting Solution Private Limited has
state-of-the-art recycling facilities designed to process various C&D waste
categories effectively. From concrete, bricks, metals to plastics, we employ
advanced technologies to recycle and recover valuable materials.
Reuse
and Circular Economy: We promote
the reuse of recycled materials as a sustainable alternative in construction
projects. By reducing the demand for virgin resources, we contribute to a
circular economy and minimize environmental impact.
Disposal
Management: For waste that cannot be
recycled, our team ensures proper and safe disposal in compliance with the
C&D Rules 2016 and local regulations.
Compliance
and Accountability: With us, you
can rest assured that your waste management practices align with the C&D
Rules 2016. We prioritize accountability, guiding waste generators,
contractors, and stakeholders in meeting the required guidelines.
Awareness
and Training: Satishsa Consulting Solution Private Limited conducts
awareness programs and training sessions to educate individuals and
organizations about the importance of C&D waste recycling and its positive
impact on the environment.
Criteria for Establishing the C&D-waste
Recycling Unit:
1. The
first and most important thing you’ll need to open your recycling plant is a
suitable location. It should have enough space to store all waste and waste
products, as well as equipment and utilities.
2.
The
second requirement is a closed space similar to a factory, but a small room can
also work, it should be at least 2000 square meter.
3.
The
machine with which you will recycle your C&D- waste is the next
requirement.
4.
Land
Should be existing in Red Industrial Zone
5.
Then
there’s the C&D- waste, which needs to be recycled. You can accomplish this
by establishing a network of C&D- waste suppliers who can supply the
required amount of C&D - waste.
Procedure for applying C&D-waste Recycling or Need of documentation
Why Are you waiting Call Now Satishsa Consulting Solution Private Limited Get your Grant?
28. Lease
of deed/Rent permission of land
29. Minimum
land requirement 500 sq mtr in Red Industrial zone.
30. Allotment
Letter
31. Ownership
document of industrial land
32. CLU
of land in private zone
33. Layout
of factory
34. Site
Plan of Factory
35. ETP
Plant
36. APCD
Device
Company of documentation:
22. CIN
/LLP certificate
23. Gst
Certificate
24. Company
Pan Card
25. Authorized
Person Pan card & Aadhar Card
26. Passport
size Photo
27. Signature
of Authorized
28. Board
of Resolution
At Satishsa Consulting Solution Private Limited, we are committed to
delivering successful tire waste recycling plant set-up solutions that
contribute to a greener future and circular economy. Our expertise and industry
insights enable us to guide you towards an environmentally sustainable and
economically viable recycling venture.
Partner with us to establish your C&D
waste recycling plant. Contact Satishsa Consulting Solution Private Limited today, and let us help you
turn your vision into a reality. Together, we can make a positive impact on the
environment while unlocking the value of C&D waste.
MANUFACTURING PLANT SET-UP
(Satishsa Consulting Solution Private Limited Provide
Complete Solution Plant Machinery, Technology & Govt Clearance/ Compliance)
Welcome to Satishsa Consulting Solution Private Limited, your
trusted partner for manufacturing plant set-up solutions. With our expertise
and experience, we offer comprehensive consulting services to guide you through
every step of the process.
Designing and establishing a manufacturing plant requires careful planning and execution. Our team of seasoned professionals understands the intricacies involved in plant set-up, and we are committed to providing tailored solutions to meet your specific needs and objectives.
Our consulting services encompass various aspects of manufacturing plant set-up, including:
Feasibility Studies: We conduct in-depth feasibility studies to assess the viability and potential risks associated with your manufacturing project. This helps you make informed decisions and ensures the project's success.
Site Selection: Choosing the right location for your manufacturing plant is crucial. We assist in evaluating potential sites based on factors like infrastructure, logistics, availability of resources, and regulatory considerations.
Facility Layout and Design: We help optimize the layout and design of your manufacturing facility, considering factors such as workflow efficiency, equipment placement, safety regulations, and future scalability.
Equipment and Technology Selection: Selecting the appropriate machinery and technology is essential for efficient and cost-effective operations. Our team provides guidance on equipment selection, procurement, and integration to ensure optimal performance and productivity.
Process Optimization: We analyze and optimize your manufacturing processes to enhance productivity, minimize waste, and improve overall operational efficiency. Our aim is to streamline operations and maximize output while reducing costs.
Regulatory Compliance: Navigating regulatory requirements can be complex. We ensure your manufacturing plant meets all applicable regulations and standards, assisting with permits, licenses, environmental compliance, and safety protocols.
Project Management: Our experts oversee the entire project, from conception to completion, ensuring timely execution, effective resource management, and seamless coordination among stakeholders.
Training and Support: We provide comprehensive training programs for your workforce, equipping them with the skills and knowledge needed to operate efficiently and safely. Additionally, we offer ongoing support and guidance to address any challenges that may arise.
Criteria for Establishing the
Manufacturing Unit
When considering the establishment of
a manufacturing plant, several key criteria should be taken into account. Here
are the steps involved in determining the feasibility of setting up a
manufacturing plant:
Market Analysis: Assess the demand for
the product or goods you plan to manufacture. Conduct market research to
understand the target market, competition, and potential growth opportunities.
Financial Analysis: Evaluate the
financial viability of the project by analyzing costs, projected revenues,
return on investment (ROI), and payback period. This analysis helps determine
if the venture is financially feasible.
Location Selection: Consider factors
such as proximity to suppliers, availability of skilled labor, transportation
infrastructure, access to markets, and regulatory requirements. Choose a
location that optimizes logistical efficiency and aligns with your business
needs.
Resource Availability: Evaluate the
availability and accessibility of essential resources like raw materials,
utilities, land, and water. Ensure a sustainable supply chain to support
uninterrupted operations.
Legal and Regulatory Considerations:
Understand the legal and regulatory requirements for establishing a
manufacturing plant, including permits, licenses, zoning restrictions,
environmental regulations, and compliance with labor laws.
Technology and Equipment: Identify the
necessary machinery, technology, and equipment required for your manufacturing
processes. Consider their cost, efficiency, maintenance, and scalability.
Infrastructure and Facilities: Assess
the infrastructure requirements, such as factory layout, production areas,
storage facilities, utilities, and employee amenities. Optimize the design for
efficient workflow and employee safety.
Human Resources: Determine the skilled
workforce needed for your operations. Assess the availability of talent,
training requirements, and potential partnerships with local educational
institutions or training providers.
By systematically evaluating these
criteria, you can make informed decisions about establishing a manufacturing
plant. It is crucial to conduct thorough research, engage with experts, and
seek professional guidance to ensure a successful and sustainable manufacturing
venture.
Procedure for applying Manufacturing Plant or Need of documentation
Why Are you waiting Call Now Satishsa Consulting Solution Private Limited Get your Grant?
37. Lease
of deed/Rent permission of land
38. Minimum
land requirement 500 sq mtr in Red Industrial zone.
39. Allotment
Letter
40. Ownership
document of industrial land
41. CLU
of land in private zone
42. Layout
of factory
43. Site
Plan of Factory
44. ETP
Plant
45. APCD
Device
Company of documentation:
29. CIN
/LLP certificate
30. Gst
Certificate
31. Company
Pan Card
32. Authorized
Person Pan card & Aadhar Card
33. Passport
size Photo
34. Signature
of Authorized
35. Board
of Resolution
At Satishsa Consulting Solution Private Limited, we are
committed to delivering successful manufacturing plant set-up solutions that
drive growth and profitability. Our client-centric approach ensures that your
specific goals and requirements are at the forefront of every decision we make.
Partner with us to turn your
manufacturing plant vision into reality. Contact Satishsa Consulting Solution Private Limited today, and
let us guide you towards a successful and sustainable manufacturing venture